Fabric Testing Tester

Hot Air Oven

Approx Price: Rs 6,000 / Piece 
We are offering a wide range of hot air oven.

Bursting Strength Testers

Approx Price: Rs 45,000 / Piece(s) 
The royal bursting strength tester is designed to find bursting strength of fabric/ leather/ paper/paper board & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.

The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge gives the bursting pressure.

The equipment is raggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance digital type pressure gauge type instruments are also available. Digital type pressure gauge with pneumatic clamping model also available.

Tensile Strength Tester

Approx Price: Rs 2.5 Lakh / Piece(s) 
The royal tensile testing machine provide a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gear box and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or newton.

the elongation of the test specimen is measured on a linear scale (or digital indicator according to the model) fixed on the frame of the tester, which indicates the distance between the grips.
the frame of the tester fabricated from mild steel to give the required rigidity and strength. Various built in safety arrangements such as over travel protection, are provided. The tester is finished in metallic painting/powder coated and bright chrome/ zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied with electrical,which include micro, switches. Push buttons, and contractors for safe and convenient operation.

A variety of grips suitable for holding different materials are offered as optional accessories. Other accessories such as slab molding dies, specimen cutting dies and specimen cutting presses are also offered as optional accessories.

Abrasion Tester

Royal abrasion tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15. 5 to 16. 3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement to the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degree to the perpendicular in the direction of rotation and placed above the longitudinal axis of drum. A rack and pinion arrangement to rotate the test specimen about its axis during the test (whenever desired) is also provided. The abrasive cloth is firmly fixed to the drum using a suitable peel able adhesive with the ends of the abrasive cloth butt jointed together. The equipment is provided with limit switches which, in addition of giving over travel safety to the movement of test holder by preventing the lower edge of the test specimen holder to touch the abrasive cloth. The equipment is built on rigid steel base and finished in grey metallic and bright chrome / zinc plating to give it a corrosion resistant finish. Moulding die, rotary type cutting die (hollow drill) for preparing test specimens and extra abrasive cloth are available as optional accessories.

Pilling Tester

Approx Price: Rs 45,000 / Piece(s) 
Test the pilling of the textile fabrics supplied with template, 8 rubber tubes and jig/fixture. Two box and four box models are available. The “royal" pilling tester consists of two cubical boxers inner walls of box are lined by 3mm thick cork sheet. The boxes are rotate by means of motor about the horizontal axis. A pre-set digital counter is provided for stopping the tester after pre-determined number of revolutions. A template, metal cylinder, comprising jig and 8-rubber tuber are provided with the instrument. Instrument is finished by bright chromes plating & metallic painting for corrosion resistant finish.

Crease Recovery Tester

Approx Price: Rs 18,500 / Piece(s) 
The royal crease recovery tester is designed to measure crease recovery angle of fabrics. It consists of a rotary circular scale on which a spring type specimen clamp is fixed on the base plate on which the above arrangement is mounted. The test specimen is fixed on a loading strip supplied with the equipment. After folding the specimen on the creasing line marked on the strip, the loading strip with folded specimen is kept on an anvil under the dead load of the loading arrangement for a specified time. After that the specimen with the loading strip is transferred to the clamp of the rotary circular scale, where it is held in manner that the fold lies in a horizontal line on the axis of the circular scale. The circular scale with the clamp is rotated till the free limb of the specimen becomes vertical which is judged by aligning it to a vertical pointer. The crease recovery angle is directly read on the circular scale.

Stiffness Tester

Approx Price: Rs 8,000 / Piece(s) 
We are offering a wide range stiffness tester.

Drape Meter

Approx Price: Rs 40,000 / Piece(s) 
The Royal drape meter consists of a circular specimen support, an electric lamp to give off light, and an exposing and developing arrangement using light sensitive ammonia paper to determined the area covered by the shadow of the test specimen, and an electric lamp to expose the ammonia paper to determine the area covered by the shadow of the test specimen. The circular specimen support is made out cast aluminum and is fixed over a clear acrylic sheet. The sheet is hinged at one end and can be lifted for placing the ammonia paper for exposure. The paper is kept below the acrylic sheet on a resilient surface so that it is in close contact with the sheet when it is horizontal. The specimen holding and paper exposing arrangement is kept inside a sheet metal exposing chamber. The electric lamp is fitted at the upper end of the chamber so that light rays coming from it are intercepted by the test specimen. The rays which are not intercepted fall on the paper and expose it, thus giving a demarcation between exposed and unexposed areas. The chamber has a close fittings door. It has ventilation holes near its bottom and top for keeping it cool. An ammonia vapour developing chamber in which the exposed paper is kept for developing is provided below the exposing chamber. This chamber has a close fitting door and an arrangement to keep ammonium hydroxide to create a suitable atmosphere for developing the print. The test specimen is kept over a welded wire mesh platform to ensure a uniform developing. The outside of the apparatus is finished in dark admiralty grey synthetic enamel to give it a corrosion resistant finish. A metal template of 250 mm diameter have a central hole for marking and cutting the test specimens, a specimen pressing disc, one hundred sheets of ammonia process paper, and one bottle of ammonium hydroxide are supplied as standard accessories.

Crimp Tester

Approx Price: Rs 17,000 / Piece(s) 
We offering a wide range of crimp tester.

Beasley Balance

Approx Price: Rs 12,000 / Piece(s) 
The “royal” beasley balance is used for measure the direct yarn count. The balance made of an aluminium beam which is pivoted at a bracket with the help of two jewel bearings. One end of the beam have a stainless steel hook for putting the yarn. The pointer side of the beam has a slit for placing the weight. The beam assembly is fitted in a sheet metal box which have a sliding transparent window for avoiding the air flow in the instrument. The instrument has the leveling arrangement. A template is provided with the instrument for cutting the different size of the fabric. Two weights are provided with the instrument. The instrument is chrome plated & dark gray metallic paint for given the corrosion resistance finish.

Traverse Thread Counter

Approx Price: Rs 12,500 / Piece(s) 
We are offering a wide range traverse thread counter.

GSM Balance

Approx Price: Rs 5,400 / Piece(s) 
Royal quadrant scale for gsm is a simple and quick device which directly indicates the weight per unite area in grams per square meter (gsm) on a sector scale when a sample of selected size is suspended from a clamp fixed to the pointer arm. Gsm balance measures the gsm of fabric, paper, flooring, pvc film and other flexible sheet material. The system is supplied with two templates. The royal gsm balance is designed to give the weight per unit area of textile fabrics directly. It consists of a quadrant scale calibrated in values of gsm fixed in a vertical plane on a rigid base having provision for leveling. A pointer beam is pivoted on two jewel bearings at the center point of the scale. A specimen of specified area is cut out from the fabric with the help of either of the two templates provided (or by round cutter) and is suspended on one end of the pointer beam. The weight per unite area is read directly from the quadrant scale.

Round Cutters For GSM

Approx Price: Rs 5,000 / Piece(s) 
The “royal” round cutter is used for the accurate cutting of fabrics, paper, flooring etc. The system is made of aluminium body for light weight. It has for imported blades. It has a lock which is used when the cutter is not used. Rubber pad is an optional accessory. The instrument is finished by bright chrome plating and dark gray metallic paint.

Fabric Thickness Gauge

Approx Price: Rs 10,000 / Piece(s) 
The “Royal” bench thickness gauge for fabric is used for the thickness measurement of the fabric, paper, rubber, plastic, flooring, etc. Analogue and digital models are available. The systems consists of a dial micrometer fitted on a digital micrometer fitted on a rigid metallic frame. The micrometer has a flat circular indenter, which exerts the specified pressure on the fabric sample whose thickness is being measured through a dead weight. The fabric sample is kept on an anvil, which is in from of a flat circular platform. The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the fabric sample with the help of a lifting lever.

Air Permeability Tester

Approx Price: Rs 87,000 / Piece(s) 
The “Royal” air permeability tester for textiles is used for air permeability testing of the fabrics. Digital and analogue models are available. This system consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen. The test specimen is hold between two round-shaped grips. The grips are lined with rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism. The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the digital manometer (or manometer tube) in terms of mm of water level & airflow is measured by the rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

Water Proffness Tester

Approx Price: Rs 18,000 / Piece(s) 
We are offering a wide range of water proffness tester.

Colour Fastness Tester

Approx Price: Rs 1 Lakh / Piece(s) 
We are offering a wide range of colour fastness tester.

Light Fastness Tester

Approx Price: Rs 90,000 / Piece(s) 
We offering a wide range of light fastness tester.

Flammability Tester For Fabric

Approx Price: Rs 60,000 / Piece(s) 
We are offering a wide range of  flammability tester.

Atmospheric Pressure Beaker Dyeing Machine

Approx Price: Rs 85,000 / Piece(s) 
We are offering a wide range of  atmospheric pressure beaker dyeing machine.

HTHP Glycerin Bath Beaker Dyeing Machine

Approx Price: Rs 1 Lakh / Piece(s) 
We are offering a wide range of HTHP glycerin bath beaker dyeing machine.

High Pressure Air Porosity Tester

Approx Price: Rs 87,000 / Piece(s) 
We are offering a wide range of high pressure air porosity tester.

Shrinkage Template

Approx Price: Rs 10,000 / Piece(s) 
We are offering a wide range of shrinkage template.

pH Meter

Approx Price: Rs 22,000 / Piece(s) 
We are offering a wide range of PH -meter. We are providing different number of pH Meter. All are pH Meter tester are best in quality on effective cost.

Zip Endurance Tester

Approx Price: Rs 75,000 / Piece(s) 
We are offering a wide range of  zip endurance tester.

Synthetic Hook/loop Tape Endurance Tester

Approx Price: Rs 4,000 / Piece(s) 
We are offering a wide range of  synthetic hook/loop tape endurance tester

Hot Pressing Tester For Button

Approx Price: Rs 75,000 / Piece(s) 
We are offering a wide range of hot pressing tester for button.

Tearing Strength Tester

Approx Price: Rs 65,000 / Piece(s) 
We are offering a wide range of tearing strength tester.

Snap Push Pull Tester

Approx Price: Rs 55,000 / Piece(s) 
Snap pull out tester is used to determine the holding or breaking strength of prong-ring attached snap fasteners on the garments. The testing equipment comprises of an upper snap-clamp, a lower fabric clamp & a force gauge mounted on a stand. The component to be tested is gripped by the upper snap clamp and the garment is fixed to the lower fabric clamp. Top fly wheel is turned with a specific force. The recording instrument displays the holding strength or the breaking strength of the snap component attached.

Our snap pull out tester are also used in paper industry for elmendorf tearing strength. This test determines the average force required to propagate a single-rip tongue-type tear starting from a cut in paper, cardboard, plastics, non-woven and woven fabrics, with proper configuration.

Swatch Cutter

Approx Price: Rs 43,000 / Piece(s) 
We are offering a wide range of swatch cutter-300mm. We supply these Testing and Measuring Instruments in various parts of the world in customized packaging that meets international packaging standards.

Conditioning Chamber

Approx Price: Rs 26,000 / Piece(s) 
We are offering a wide range of conditioning chamber.

Weighing Scale

Approx Price: Rs 4,500 / Piece(s) 
We are offering a wide range of weighing scale.

Hot Plate

We are offering a wide range of hot plate.

Pick Glass

Approx Price: Rs 800 / Piece(s) 
We are offering a wide range of pick glass.

Salty Spray Chamber

Royal spray tester consists of a stand for holding the spray device the button portion have a sample holder at 45° whose center lie at the center line of the spray device. Spray device made of glass (or plastic) laboratory funnel which is connected to the spray nozzle by rubber tube.

Zip Pull Out Tester

Approx Price: Rs 55,000 / Piece(s) 
We are offering a wide range of  zip pull out tester.

Zip Tensile with Various Types Of Grips

Approx Price: Rs 120 / Meter(s) 
We are offering a wide range of zip tensile with various types of grips.

Zip Abrasion Tester

Approx Price: Rs 20,000 / Piece(s) 
We are offering a wide range of  zip abrasion tester.

Zip Resistance To Heat Underload Tester

Approx Price: Rs 55,000 / Piece(s) 
We offer a comprehensive range of zip resistance to heat underload tester, which is manufactured from quality raw material. Additionally, these devices are highly used to determine the resistance of zip to heat underload. Additionally, our range of devices gives superior performance, high durability and accurate reading. Also, these devices are checked prior to delivering the customers so as to ensure high customer satisfaction. Moreover, our range of prices is very economical prices.

Pressure Head Tester

Approx Price: Rs 35,000 / Piece(s) 

We bring forth for our esteemed clients an extensive range of Pressure Head Tester as per Aatcc 127/Bs En 20811, which are fabricated with high quality raw materials. Also, our range of instruments are are simple to operate and high in demand due to robust construction and outstanding performance. Additionally, our clients can avail these instruments in various technical specifications as per their requirements. Further, we offer this instrument at pocket friendly prices.

Single Fiber Strength Tester

Approx Price: Rs 65,000 / Piece(s) 
We are offering a wide range of single fiber strength tester.

Oxygen-Index Apparatus

Approx Price: Rs 60,000 / Piece(s) 
we offer the oxygen index apparatus.

Toxicity Tester

Approx Price: Rs 60,000 / Piece(s) 

We are instrumental in offering our clients with toxicity tester as per NCD-1409, which are manufactured in compliance with the various international and national quality standards. Moreover, these instruments give accurate reading of amount and the level of toxicity present in the subject. Also, our clients highly acclaim these devices for its high operational functionality, high durability and longer service life. Additionally, our lower price and high end features of products allure clients to avail these products.

Spread Of Flame Tester

Approx Price: Rs 60,000 / Piece(s) 
We are offering a wide range of spread of flame tester as per UIC 564 or appendix 5.
Looking for Fabric Testing Tester ?
© Associate Agencies, Ahmedabad
Desktop Site Back to top